About Oilcloth

About Oilcloth

When you are buying a new oilcloth you will need to know know the dimensions of your table and to have decided how much overhang you would like to have. Generally 20 cms on each side and end is acceptable. This would entail you measuring your table and adding 40 cms to the length and 40 cms to the width. You may however want a smaller or larger overhang though. Please check the width of the chosen oilcloth against the width of your table. If is wider, oilcloth can be trimmed accordingly. If it is too narrow, then it will not cover the table adequately.
So, armed with your measurements you know that if your table measured 2 metres by 1 metre, the amount of oilcloth you would require for your tablecloth would be approximately 2.5 metres. By following these simple steps, it will help to make sure that you are not disappointed.

Oilcloth is resistant to most stains, so great for the kitchen, but they are not completely foolproof, so do be a bit careful with curry, tomato, oil and salad dressings, lipstick, newsprint and felt tipped pens! In fact, anything you suspect of having a strong dye capable of travelling. Matt PVC oilcloth is more susceptible to staining. We cannot take responsibility for staining so please treat it with care, don't leave anything on it which may stain, and wipe it clean after use.

To clean your PVC oilcloth, just wipe with a damp, soapy cloth. If really stubborn try some neat bleach, but on a place where it won't notice to begin with.The acrylic oilcloths can be machine washed. If it is a linen one then to 30 degrees. If it is cotton, then to 40 degrees. Don't tumble dry them, but when they are dry, iron on the reverse. This re-activates the water and stain resistance.

SAMPLING

We offer a sampling service. The first two are free but more will incur a postage charge and there is a limit of five. We urge customers to make use of this service as colour accuracy cannot be guaranteed on the internet.


If your oilcloth has been delivered folded we recommend that it is taken out of the package and laid flat as soon as possible. Dark colours can mark if creased and we really recommend that these are delivered on a roll.

If you need to remove creases you can gently iron on the reverse side, or run a warm hairdryer over it. Alternatively leave it in the sun. 

This may seem silly, but please make sure you are using your oilcloth with the correct side facing up. Just occasionally a customer has reported excessive staining and it has been due to them using it with the coated side underneath. This will not keep it clean or dry. On some of the French ones, the coating is very discreet, but you will always be able to discern a faint sheen. This is the coating and it faces upwards.

It is not heat resistant. Please protect from hot pans..​​​​​​

There is no need to hem the edges, but if you want something really stylish, then you can of course, sew a coloured binding around the edges.

We use it in the garden, where it resists rain, protects the table, and looks good too. It will eventually fade in the sun, but we tend to have a new one for the kitchen every year, and then use the old one outside, in which case it doesn’t really matter too much.​​​​​​​

It is available in a fabulous range of designs and colours, and with the average width being about 137 cms for pvc , and wider ones, up to 175 cms, available in the French Acrylic range, is wide enough for most tables.​​​​​​​

Another frequently asked question is 'how do I sew oilcloth'. Well, it isn't too difficult really, because it doesn't fray, but we find that a teflon foot on the sewing machine works brilliantly and stops the oilcloth gripping the foot. Alternatively, you could stick a strip of masking tape to the underside of your machine foot. Large stitches help too.​​​​​​​